how would you guys set up a behringer cx2310, would you set the cross over point on a 2 way system at say 120hz and everything below 120 going to you bins and everything above 120 going to your tops or would you set it at 120hz and only go to your tops and using sub out for your bass bins if that makes sence
also what is the best thing to pair up with a pair of 15"bins ie. 10" 12" 15" tops

OK I'm not an expert but...

The sub out on the CX2310 is mono - it wont make much
difference but I've been using mine as a stereo two
way crossover and not using the mono sub out.

I dont know of any rules about mid-top size matching
to sub size - different manufacturers seems to recommend
different pairings. I use 18" subs with 15" mid-tops. I have
used 15s+15mt and just played around with the levels.

Sorry I cant be more help.

Chris.

I use mine in stereo and I dont use the sub output.......

so you should have stereo on via two XLR's and then 4 xlr leads coming out.. two for top and 2 for sub....


also turn the 25hz sub sonic filter on it will clean up the audio path


Set all the levels/gains the same at first 12 oclock and the crossover point at arround 120hz then see what she sounds like....