Daz35
Aug 31 2004, 06:38 PM
This might have been covered before, but if it hasn't this really winds me up.
Why do people do it?
I don't have speakers on stands, so mine are always liable, being the right height, to have bottles and drinks put on them.
I always ask people to take them off as soon as I spy them making a move, but it's not always possible.
Don't get me wrong, if you suggets politely that it's not a good idea then people do remove them. But if you don't, within twenty minutes they're full to the brim with peoples unwanted dregs!
Anyone put signs up, or got any ideas about this?
RobbieD
Aug 31 2004, 07:00 PM
I use subs with poles for the tops, and get the same thing on the subs. I gave up telling people not top put their drinks there years ago.
I tried signs - drunk people obviously can't read.
I just let them do it, then use an old cloth and some bottled water to wipe the sticky glass marks off the top at the end of the night.
But one club that I used to work at had a good solution. The subs were on both sides of the dance floor, and very convenient for dancers to place their drinks. So they added plywood "pyramid" tops to the subs. It was impossible for anyone to leave a glass on the sloping surface.
You could make a fold flat version of this from thin plywood, or even card. Another idea is to fix rows of triangluar section wood on the top, so that it is impossible to stand a glass up on the speaker.
DJ Marky Marc
Aug 31 2004, 07:13 PM
I found that drunk people will try and balance a glass on anything flat looking my roadie spends the night removing these glasses to a safe place.
milhouse
Aug 31 2004, 07:36 PM
Gary
Aug 31 2004, 08:22 PM
People almost expect it dont they...
"Hey cool, these drink stands have got music coming out of them..."
I used to have the same problem with light screens but used short lengths of "half drain pipe", round~side UP...
Speakers can be similarly protected by sections of "egg crate" acoustic foam...you know, the dimpled stuff....one look at that and they wont even try to put a glass on it...watch out for cigarettes though, depending on the shape of the edges...
Lightweight, reusable, easily stowed/transported...could this be another group buy?
transeurope
Aug 31 2004, 08:30 PM
I have tried the pyramid, half round pipe solutions and found that while they work on most occasions, all that good work is undone the night you get someone that doesn't realise why he can't put his drink down and keeps trying. They REALLY make a mess...
The end solution was cheap, and one of those doh! moments that I didn't think of it earlier.....rope lights.
I have never come across someone so drunk they tried to put drink on top of subs with a rope light on top coiled barb wire style.
Best of luck with your problem, I hope this helps...
YourBigEvent
Aug 31 2004, 08:39 PM
Take them away and drink them as they were left on your property.
High Fidelity
Aug 31 2004, 10:10 PM
The wedding I did on Saturday I tried something new as there was limited space.
I put the speakers under the stand so they were behind the curtain.
I have to say it made for a very neat looking setup, but they still manage to hang their hand with the drink in it over the front of the stand when they come to make a request.
Hugmaster
Sep 1 2004, 06:05 AM
Hi
After a quick announcement that anybody found placing drinks on the speekers wll either end up with a huge repair bill or a drink poured over them solved my problem.
Darren
Cheezy
Sep 1 2004, 12:50 PM
Rope lights work for me when using my small set up. For the bigger venues the speakers are on stands so unless you are 7' tall you won't think of putting drinks there!
Cheezy
Gary
Sep 1 2004, 01:35 PM
Alternatively, get one of those rubber bath/shower mats with the mini suction cups underneath, and place one upside down on each speaker.
Not only will this offer a water/drink proof layer to the top of your speaker, but will also mean that the the glass of drink stays put until the drinker pulls with enough force to shower themselves with the former contents of their glass...
Dynamite Discos
Sep 1 2004, 02:15 PM
| QUOTE |
| ot only will this offer a water/drink proof layer to the top of your speaker, but will also mean that the the glass of drink stays put until the drinker pulls with enough force to shower themselves with the former contents of their glass... |
Will have to try that one
| QUOTE |
| I put the speakers under the stand so they were behind the curtain. |
did this not affect the sound? Ive been meaning to ask about this as i am currently thinking about cutting back and just taking one sub to gigs - however i dont want the setup to look unbalanced with a sub on just one side. If it is under a table behind a tablecloth (its quite a thick one but is just a tablecloth!) will i lose alot of power? under the table would also seem to be the best place for it as it will usually be in the middle of the dancefloor?
Would be interested to know how it sounded like this High Fidelity
Cheers
Steve
nrgize
Sep 1 2004, 09:07 PM
s my girlfriend works in a pub she let me nick some beer towels from her. I put 4 ontop of each speaker. When they put drinks on them I ask for them to be removed, but for the little while the glass was on the speaker it hadn't made a mess. I think the Pyramid idea is a really good one!!
High Fidelity
Sep 1 2004, 11:13 PM
| QUOTE |
| did this not affect the sound? Ive been meaning to ask about this as i am currently thinking about cutting back and just taking one sub to gigs - however i dont want the setup to look unbalanced with a sub on just one side. If it is under a table behind a tablecloth (its quite a thick one but is just a tablecloth!) will i lose alot of power? |
Dynamite.
The sheet I have across the front is fairly thin as it has lights behind it as well which shine through. It didn't affect the sound at all. In fact it sounded slightly better on the bass as the speakers were sat on the same wooden floor as the dance floor.
In fact, I've decided to do it regularly when on the same level as the dance floor, or where there is limited space.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.