my mate has a Kam LED swingfire and all it shows is the red dots not the other colours works fine apart from that..i had a quick look and i couldn't see any dry joints ..he bought a pair and the other one is fine .

Anyone had this and solved the fault?

Are you sure he's not colourblind

lol knew there would be a smart alex along lol

was hoping it was a common chip fault or capacitor or resistor i could change.

i changed the Toshiba ULN2803AG's... still the same fault.

I have a pair of these and had the same problem. Got my mate to check them and he came back that he could find nothing wrong with them. He had them apart, cleaned them and they were fine. I run them off a double lead instead of 2 singles and maybe its just me, but it doesnt do it as much. And for the price i paid i'll settle for that.

I'm assuming the chips you replaced are the output stage ones (i.e. there's no triac beyond that) ?

Checked with a multimeter that the outputs are working? You coudl also check the inputs to the chip to see if theres any voltage there (likely to be 5v or 12v input possibly?).

Could be the controller chip that's up the swanny though - I'm not familiar with what's in these units - but I'd guess there ain't much!

Cheers,

David