Which wire will I need to connect click me to a DA 300 Warrior Audio DA300 Amplifier click me and will it work?

Thank you! :)

Only had a quick look but I would have thought a standard phono to jack lead would suffice.

Third from bottom on this link:

http://www.cabling4less.co.uk/index.php?ac...Term=phono+jack

(sorry, don't know how to "click me")

2 of THESE will do the job. You need adaptor leads with 2 x XLR female sockets to connect to the Numark CD1 Mix with 6.3mm male mono Jack plugs or RCA connectors to connect to the Warrior amp

Will the standard phono to jack lead that deejaymitch suggested not work?

No that wouldn't work, the CD Mix has 2 x male XLR outputs so you must connect to these with XLR female sockets. The Warrior amp has 6.3mm mono jacks and RCA socket inputs, you could use either, so you will need 2 x leads with XLR female to 6.3mm mono jack plugs OR 2 x leads with XLR female sockets to RCA plugs, I would suggest 1 - 1.5M long, but this obviously depends where you want to put the CD Mix in relation to your amp.

Awsome, thank you. Have any links to where I can get these cheap and hopefully with next day deleivery?

I've got a Warrior DA500 and it has phono inputs. Just had a look at the CDMIX manual and it has master phono outputs so a phono to phono cable should be okay.

Manual is here click here ,page two, bottom diagram, item 5 - RCA master outputs

Sweet, well I already purchased the standard phono to jack lead, if it doesn't work I'll let you know.

I'm sure it will be fine but you will have to use the phono master outputs from the CD Mix and plug the jacks into the jack sockets on the amp.

That should be fine. :)

That sounds a bit omnious, do you have just one lead or two? if you have just the one lead with 2 x RCA plugs it will have a single stereo jack fitted which is wrong, you need 2 x mono jacks to connect to your amp

Well I'm going to wait for the mixer and amp to arrive before I start buying new leads now. :p

Well for a yung un u have the right attituded as in not jumping in with both feet and listening to ppl.Theres a certain member on this forum who used good judgement at 15 and is flying high now.


Good luck m8

Paul

The AMP has female inputs yet the mixer has male outputs, why would I need a jack plug?

(OMG I LINKED TO THE WRONG AMP... THEY SENT ME ONE WITH FEMALE INPUTS ALTHOUGH IT'S A BETTER AMP)

What wire will I need now? :p

I assume you are referring to Male and Female XLR? In that case, all you need is 2 x male XLR - 2 x female XLR ebay link

I've bought it, now waiting for it to arrive. :)