Does anyone know if it's possible to get a rack mountable usb keyboard to use with the HD 2500 in a case like this

Flightcase

As you're not looking for a slide out drawer for the keyboard to go in, then a good alternative might be a normal metal 2U or 3U blanking panel with some strips of self adhesive velcro on it, then a separate USB keyboard with matching velcro strips on it.

Remember to drill a loose hole on a suitable edge of the blanking panel, to allow for the keyboard cable to go back down to your powered hub.

One thing with that case. It's shown as 12cms deep - that's very close to the depth of the DN-HD2500 itself - although you won't haveto add any extra measurement to allow for cables etc, as those are recessed on the 2500.

Gary

Thanks for that suggestion.

Glad to see from your photo that you've had the operation. Looking good

I take it that this flightcase would be better suited as the Denon is 12.7cm and the other case was only 12cm.

Was just wondering if you went for one of these cases, and if you did which one did you go for. I've had my HD2500 for just over a week and need a case for my mixer and 2500 to go into, want to lay it out with the 2500 first and the mixer at the top. the mixer I'm using is 6 units so the case needs to be at least 10 units to allow for the plugs into the back of the mixer.

Thanks for any advice
Jase

Not yet, as I'm still saving up my pocket money, but I definately think it's the one I'll go for along with my D500 mixer.