This might be in the wrong listing

Any one know where you can get spare screw fittings for the goal post stands.

The bacoalite moulding has broken on 2 of mine.
I have tried a search for these but not found any.

Cheers

Pete

Thanks for putting in the right area.

Make not known.

The thread is on the length bars which go through the side bars.

Which these knobs screw onto.

Sounds like an Ultimax.
Ring the manufacturer, ANDY TAIN on 01215154180

He sells packs.

PLEASE NOTE : New number for Ultimax.

Thanks Kingy

Yes it is a Ultimate Frame and parts on order.

Have to say Andy was very helpful and gave lots of info on such a simple item.
Theres me been making bits and pieces for it.

Cheers


Pete

Incidently, its worth noting that with Ultimax stands, you DONT HAVE to order a whole pack of any of their connectors, bolts, nuts (pack may contain nuts) etc... you can order them in 1's or 2's etc...

And Yes, there are a stunning range of add-ons, even little bolt on bits for hanging your headphones on, or some nifty looking 3U, 5U and 7U 19inch rack mount pan/tilt shelves for mixers, lighting controllers etc, that just clamps onto the upright poles.

My best ultimate "add on" was the pair of 45 degree brackets with 35mm horns that attach to the uprights to allow you to fit 12" speaker cabinets to them without the need for tripod stands and trailing leads.

I also have a 19" pan/tilt shelf, but its versatility and usefulness was increased when I drilled a 10mm hole 4" in from each end of the shelf, as the attachment hole as supplied (in the middle) meant that the shelf encroached too far over the deck stand.